Wind Spinner Sublimation Print Transfers

 Wind Spinner Sublimation Prints

~ You will receive 2 of this print in either size you order.

~ Pick your size either for an 8" or 10" standard spinner. These images will be sized at 8.53" and 10.53" in diameter as a circle print. This will help ensure full coverage. If you have a non standard spinner blank please reach out first to ensure the image you want can be resized or utilize the gang sheet option here.

~ All prints are printed on a professional sublimation printer and high quality sublimation paper for the best results.

~ You must have a heat press in order to use this print. Proper equipment should be used to utilize sublimation prints correctly.

~ All prints will arrive to you mirrored so they transfer correctly to your substrate.

~ Please note the colors will appear dull on the sublimation print transfer. Once you press the image it will be more vibrant.

~ Pressing Suggestions For Wind Spinners: 

• Due to the different wind spinner blanks please refer to the pressing requirements for that substrate. I am unable to advise you on what works best for these due to the many different manufacturers. 

• Preheat your heat press per manufacturer's suggestion.

• Set timer per manufacturer's suggestion.

• Set Pressure per manufacturer's suggestion.

• Place transfer face down onto your substrate and tape in place to avoid ghosting and shifting of the transfer. Then cover with a teflon sheet or butcher paper.

• Press the first side and then allow to cool.

• Flip spinner over and place on butcher paper or a teflon sheet to protect your heat press. Place image on 2nd side and press as per above

• Remove paper immediately and peel hot.

~ Only you know your press all information provided is to be used as a suggestion/starting point only. You may need to test a print with your substrate to achieve the best possible results. Please note that pressing for too long or at too high of a temp can ruin the substrate and print. Which may result in a brown and/or blurry image on your substrate. Adjust your time and temp according to your desired finished results.

~ Please note I cannot print in white for sublimation so anywhere you see "white" does not exist and will be the color of your substrate.

* Please note colors may vary based on your monitor/device resolution. All prints are high quality resolution ranging from 300dpi and up. All prints are printed with high quality print settings for the best results.

** I am not responsible for damage during shipping. Prints ONLY ship via priority. I am not responsible for failed projects due to your application methods. It is your responsibility to inspect before using.