Affirmation Print 1 Tumbler Sublimation Transfer
Tumbler Sublimation Prints
~ This sheet contains 2 prints which may or may not be cut into 2 prints before shipping.
~ All prints are printed on a professional sublimation printer and high quality sublimation paper for the best results.
~ You must have a heat press or tumbler press/convection oven in order to use this print. Proper equipment should be used to utilize sublimation prints correctly.
~ All prints will arrive to you mirrored so they transfer correctly to your substrate.
~ All prints are approximately 9.3" x 8.2" and will arrive with a white border. Trim as needed for your substrate.
~ Please note the colors will appear dull on the sublimation print transfer. Once you press the image it will be more vibrant.
~ Pressing Suggestions For Garments:
-
Safety First! Use heat resistant safety gloves.
- Preheat your heat press temperature to 375-400 degrees Fahrenheit.
-
Set timer to 50-60 seconds.
-
Set Pressure at light to medium.
-
Place parchment/butcher paper inside the garment so the ink does not bleed onto the back of the shirt or your heat press. Reusing the paper is not recommended.
- Pre-Press your garment to remove moisture.
-
Place transfer face down onto your garment and cover with butcher paper.
-
Press at 375-400 degrees F for 50-60 seconds with light to medium pressure.
-
Remove paper immediately and peel hot.
~ Pressing Suggestions For Tumblers:
-
Safety First! Use heat resistant safety gloves.
- Preheat your tumbler press or convection oven to 375-400 degrees Fahrenheit.
-
Set Pressure to light to medium.
-
Use Heat Safe tape to secure your image to your tumbler. DO NOT overlap the image, you may need to trim it first.
- Press according to your tumbler press or for 6-9 minutes in a convection oven.
-
Rotate your tumbler if placing it on the side in a convection oven.
-
Remove paper immediately and peel hot.
~ Only you know your press/convection oven all information provided is to be used as a suggestion/starting point only. You may need to test a print with your substrate to achieve the best possible results. Please note that pressing for too long or at too high of a temp can ruin the substrate and print. Which may result in a brown and/or blurry image on your substrate. Adjust your time and temp according to your desired finished results.
~ Please note I cannot print in white for sublimation so anywhere you see "white" does not exist and will be the color of your substrate.
* Please note colors may vary based on your monitor/device resolution. All prints are high quality resolution ranging from 300dpi and up. All prints are printed with high quality print settings for the best results.
** I am not responsible for damage during shipping. Prints ONLY ship via priority. They will be packaged between 2 pieces of thin chipboard to help prevent damage from bending. I am not responsible for failed garments or tumblers due to your application methods. It is your responsibility to inspect before using.