Spooky Squad Print 91 Shirt DTF Print Transfer
Shirt DTF Prints
DTF (Direct to Film) Prints are a great option to apply to ANY Color garment with any fabric blend. Please note I have only ever applied these to Cotton, Polyester, and Poly/Cotton Blends. Pressing on other fabrics should be tested thoroughly by you before you sell finished products. All sizes available are suggestions for use.
~ All prints are printed on a professional DTF printer and high quality DTF film for the best results.
~ You MUST have a heat press in order to use these prints, an iron will not work. Proper equipment should be used to utilize DTF prints correctly.
~ All prints will arrive to you on a carrier film and will have a white ink back. This is what allows you to press on any color garment. If there is white in the image then the print will have white ink in the image. You must lay the sheet down on your garment with color side up which will be the glossy side of the sheet.
~ All prints are sized to the option you select either by width or height then auto sized appropriately for the opposite direction. Trim as needed for your substrate. I.E. if a print is taller than it's width then it will be sized to your selection by height and auto width.
~ Pressing Suggestions For Garments:
-
Safety First! Use heat resistant safety gloves.
- Preheat your heat press temperature to 300-330 degrees Fahrenheit.
-
Set timer to 15-25 seconds.
-
Set Pressure at medium.
- Pre-Press your garment to remove moisture.
-
Place transfer face up, the glossy side of the film will be up, onto your garment and cover with a teflon sheet/parchment paper/butcher paper.
-
Press at 300-330 degrees F for 15-25 seconds with medium pressure.
-
Remove from press and allow to fully cool then peel cold.
- After peeling place back on heat press cover with a teflon sheet/parchment paper/butcher paper and press a 2nd time for 10-15 seconds.
~ Care & Washing Instructions:
-
Do NOT scratch the white side of your DTF Print Transfer. The image can be scratched off and ruined.
- Garment should be washed inside out for best longevity results.
-
Do NOT bleach shirt after applying DTF Print.
~ Only you know your press all information provided is to be used as a suggestion/starting point only. You may need to test a print with your substrate to achieve the best possible results. Please note that pressing for too long or at too high of a temp can ruin the substrate and print. Which may result in a melted looking brown and/or blurry image on your substrate. Adjust your time and temp according to your desired finished results.
* Please note colors may vary based on your monitor/device resolution. All prints are high quality resolution ranging from 300dpi and up. All prints are printed with high quality print settings for the best results.
** I am not responsible for damage during shipping. Prints ONLY ship via priority usps mail. I am not responsible for failed garments due to your application methods. It is your responsibility to inspect before using. It is your responsibility to be familiar with the process of pressing DTF Prints, if you are a first time user it is recommended that you do your research first before ruining a garment or print.